Klein Screwdriver Set
 |
This set comes with everything you need. Has your flat head screwdrivers, phillips #2, and a trim screwdriver. |
Author Archives: iti software
Klein Strippers
 |
These are the most comfortable strippers I have ever used. They form to your hand well and the spring is not too tight allowing for easy usage. These also have the 10-32 and 6-32 hole slots so you can cut them down and not damage the thread. I also use the hole above the side cutters to make loops my wires for terminations on receptacles and switches. |
Klein Needle Nose Pliers
 |
I use these for multiple tasks. They are great for reaching dropped screws or to hold a screw for drilling. |
Klein Diagonal Side Cutting Pliers
 |
I primarily use these to cut my wires to specific lengths when I am terminating on devices. |
Klein Pliers
 |
This is my most versatile tool I use. It is a must for twisting wires together for tight connections. They can also be use to tighten Red B-Caps and pull fish tape. |
French Curves
 |
A French curve is a template made out of metal, wood or plastic composed of many different curves. It is used in manual drafting to draw smooth curves of varying radii. The curve is placed on the drawing material, and a pencil or other implement is traced around its curves to produce the desired result. |
Compass
 |
A compass is a technical drawing instrument that can be used for inscribing circles or arcs. A typical compass is consists of two legs. One pencil lead is added to a leg and a tip point to pivot on paper is provided to another leg. Circles can be made by fastening one leg of the compasses into the paper with the spike, putting the pencil on the paper, and moving the pencil around while keeping the hinge on the same angle. |
T-square
 |
It may also guide a set square to draw vertical or diagonal lines. Its name comes from its resemblance to the letter T. The top of the T-square hangs off of the drafting table and is called the head; the blade is the part that stays on the drafting table. The T-square usually has a transparent edge made of plastic which should be free of nicks and cracks in order to provide smooth, straight lines. |
Set-squares
 |
A set square is an object used in engineering and technical drawing, with the aim of providing a straightedge at a right angle or other particular planar angle to a baseline. |
Mini Drafter
 |
The mini-drafter is a versatile tool and can be used to draw almost everything. It can be used to draw parallel lines, perpendiculars, inclined lines of any degree with unmatched speed. It consists of one long scale and one small scale and the scales are in ‘L’ shaped which can be fit on any drawing board easily . |